We are bringing you 3 common faults of the generator today, helping you summarize the reasons for the faults. Hope it helps.

When the engine fails to provide enough power to meet the load requirements of the generator, the generator will start electric operation.Here, the generator system is forced to compensate for losses by providing active power to the engine, essentially making the generator work like an electric motor.

The generator is overheating

Overheating is a common diagnosis for electrical generator maintenance. Overheating in a generator may be caused by various reasons, including overloading, overspeed, insulation breakdown of windings, and insufficient lubrication of bearings.

When the generator begins to overheat, the AC generator will also overheat, which will greatly reduce the insulation performance of the winding.If ignored, overheating will further damage other parts of the generator, which may require maintenance or replacement.

Generator fault current

Fault current is any unintended high current in an electrical system. These faults may cause various problems to your generator. They are usually caused by low impedance short circuits.

If the fault is a generator winding short circuit, please check or repair the generator immediately, as the winding may overheat and be damaged.

Motor drive

Now, diesel generators are almost an essential piece of equipment for every industry. Industrial diesel generators are mainly used to provide backup power during power outages for facilities, businesses, and even families. In areas where the local power grid is unavailable or difficult to access, diesel generators are also used as the main power source.

Therefore, we remind you that a generator trip will cause serious consequences.Therefore, you should understand the common causes of generator failure so that you can discover and repair them before they severely damage the generator.