The generator has been used for a long time, and the water tank will appear scale, most of the scale is some kind of scale, how should it be handled, and today the company will bring everyone the correct handling method.

The generator cooling system also has corresponding damage during the operation process, it is necessary to add water to the cooling system in time, some customers do not add cooling fluid or pure water, but rather directly add hard water, the results show that the calcium and magnesium ions in the hard water are very easy to react with the organic components in the general cooling fluid to form scale and dirt.

If there is too much scale and dirt in the generator water tank, impurities will block the tank and it will be very easy to cause incorrect ignition, which will lead to the generator overheating and the thermal conductivity decreasing, directly harming the actual cooling effect and reducing the service life of the generator.

The specific steps to completely remove scale and dirt in the water tank of an electric generator are: use 30 kilograms of water, 2.5 kilograms of caustic soda, and 0.6 kg of kerosene to make a cleaning agent, and pour it into the tank.Turn on the generator and operate it at medium speed for 10 minutes, then the engine shuts off.

Wait for 10 to 12 hours before restarting the generator, running at medium speed for 10 minutes, then turn off the engine and release the cleaning agent.Add clean cooling water and start the generator, operating at medium speed for self-cleaning.In this way, repeating 2 to 3 times, you can thoroughly eliminate scale and dirt clean and clean.

Today we have simply introduced to everyone the correct way to clean the dirt in the generator water tank, what else do you need to know about this, welcome to consult our company website, and then we will introduce the relevant information to everyone.