It is well known that generators are a type of emergency power supply equipment, and generators also have a certain service life. If the diesel generator is operated correctly, its service life can be extended.Today the company brought some correct usage methods for generators to everyone.

The correct use of diesel generators is very important, and the specific steps are as follows:

1. Add engine oil to the diesel generator (the engine oil must be added to the correct position, neither too much nor too little).Each diesel generator has an oil level gauge, add oil to the gauge, then add diesel. If it is a water-cooled diesel generator, you also need to add water.

2, turn the power switch on the diesel engine side box or the diesel generator control panel to the ON position.

3, use the key to start the diesel generator, check whether the electrical instruments or controllers are normal, and whether the unit has any abnormal sounds.

4, Check if the voltage and frequency of the diesel generator are the values you require.

5, Observe carefully the various working status lights and oil pressure, as well as the water temperature on the diesel generator, and whether the unit has any abnormal sounds.

6. We must first unload all the loads from the diesel generator before stopping, then reduce the speed of the diesel generator to idle speed, and finally stop the diesel generator.

If the diesel generator is used for a long time, we cannot stop the diesel generator immediately after removing the load from the diesel generator. We need to let the diesel generator run unloaded for a few minutes to allow the diesel generator to have enough cooling time.

If you encounter any other problems during use, please contact the company and we will provide you with professional solutions.